The functions assigned to each configurable element are configured using GoFlight's GFConfig software (download from goflight and click on the current versione). Labeling of the switches is done by using the MagLabels included with each unit. The GF-166 requires 2" of vertical space in a GoFlight module bay, and is compatible with all GoFlight cockpit module enclosures. For mounting in custom cockpits, allow 3" of depth behind your panel. Dimensions: 2" tall, 7.25" wide, 3" back clearance. The mounting hole centers are 0.5" down from the top edge of the panel, 6.75" apart, and 0.25" from the left & right edges of the panel

2" tall, 7.25" wide, 3" back clearance. The mounting hole centers are 0.5" down from the top edge of the panel, 6.75" apart, and 0.25" from the left & right edges of the panel. The GF-T8-2 requires 2" of vertical space in a GoFlight module bay, and is compatible with all GoFlight cockpit module enclosures. For mounting in custom cockpits, allow 3" of depth behind your panel.

Engine Start Gear Up /Down Cowl Close/Open Fuel Pump Carb Heat Pilot Heat Lights On/Off: Panel Beacon Nav Strobe Taxi Landing Master Switches Battery Alternator Avionics Software Compatibility: All Microsoft Flight Simulator 2004 (FS9) and FSX: default and add-on aircraft. All X-Plane (excluding Mobile version) and Project Magenta software modules. The functions assigned to each configurable element are configured using GoFlight's GFConfig software (go to the current version by clicking here). Dimensions: 2" tall, 7.25" wide, 3" back clearance. The mounting hole centers are 0.5" down from the top edge of the panel, 6.75" apart, and 0.25" from the left & right edges of the panel. The GF-SECM requires 2" of vertical space in a GoFlight module bay, and is compatible with all GoFlight cockpit module enclosures. For mounting in custom cockpits, allow 3" of depth behind your panel.

4 Rotary Control Knobs 8 Programmable Pushbuttons – See the GF-P8 module for description Each of the control knobs on the RP48 can be used to adjust instrument panel settings such as Altimeter, Gyro, OBS1 and OBS2, as well as many others. For day verses night flying, you can use a RP48 knob to set the brightness level for the displays and indicators on all of your GoFlight modules. When installed with GoFlight home cockpits that include GF-45 or GF-166 modules, the RP48's knobs can be programmed as Mode Selectors, allowing you to select all available avionics modes on the GF-45 and GF-166 modules. Software Compatibility: All Microsoft Flight Simulator 2004 (FS9) and FSX: default and add-on aircraft. All X-Plane (excluding Mobile version) and Project Magenta software modules. The functions assigned to each configurable element are configured using GoFlight's GFConfig software (go to the current version by clicking here). Labeling of the switches is done by using the MagLabels included with each unit. Dimensions: 2" tall, 7.25" wide, 3" back clearance. The mounting hole centers are 0.5" down from the top edge of the panel, 6.75" apart, and 0.25" from the left & right edges of the panel. The GF-RP48 requires 2" of vertical space in a GoFlight module bay, and is compatible with all GoFlight cockpit module enclosures. For mounting in custom cockpits, allow 3" of depth behind your panel.

The GF-AC full height rack provides a sturdy and versatile enclosure for all of your GF-AC cockpit control modules. The full height rack is constructed from aluminium, making it strong yet lightweight. It stands 15" tall, is 7.5" wide, and 10" deep. There is 14" of vertical mounting space within the module bay area. Mounting rails on the left and right edges of the module bay contain 8-32 threaded holes on 1" centers. As shown, the back is completely open, making for quick and convenient arrangement of modules and cabling. There is plenty of room to contain USB hubs and all connecting cables inside the rack, behind the GF-AC modules which mount to the vertical rails

TWR Three Wide Rack is designed to sit under your monitor and hold three 2" modules. These racks canbe stacked.

Module Bay Cover

Using its programmable pushbutton, a single GF-46 unit can be used to control all cockpit functions while in flight. Mode selection on the GF-46 can be controlled using GoFlight's GF-P8 and GF-RP48 modules when the GF-46 is operated in combination with those modules. Dual concentric rotary encoders provide realistic tuning of radio frequencies when used in avionics modes. Multiple GF-46 units can simultaneously display and control a large amount of cockpit information. Software Compatibility: All Microsoft Flight Simulator 2004 (FS9) and FSX: default and add-on aircraft. All X-Plane (excluding Mobile version) and Project Magenta software modules. The functions assigned to each configurable element are configured using GoFlight's GFConfig software (go to the current version by clicking here). Labeling of the switches is done by using the MagLabels included with each unit. Dimensions: 2" tall, 7.25" wide, 3" back clearance. The mounting hole centers are 0.5" down from the top edge of the panel, 6.75" apart, and 0.25" from the left & right edges of the panel. The GF-46 requires 2" of vertical space in a GoFlight module bay, and is compatible with all GoFlight cockpit module enclosures. For mounting in custom cockpits, allow 3" of depth behind your panel.

Microsoft Flight Simulator 2004 and FSX: Responding to the menu-based air traffic control in Microsoft Flight Simulator 2004 and FSX can be done using the GF-ATC's single rotary knob. An integrated push switch and single-digit LED display give FlightSim pilots control over the ATC pop-up menu and all menu selections. FlightSim pilots will experience a new touch of realism while waiting for ATC at busy virtual airports. Software Compatibility: All Microsoft Flight Simulator 2004 (FS9) and FSX: default and add-on aircraft. All X-Plane (excluding Mobile version) and Project Magenta software modules. The functions assigned to each configurable element are configured using GoFlight's GFConfig software (go to the current version by clicking here). Dimensions: 2" tall, 7.25" wide, 5.5" back clearance. The mounting hole centers are 0.5" down from the top edge of the panel, 6.75" apart, and 0.25" from the left & right edges of the panel. The GF-ATC requires 2" of vertical space in a GoFlight module bay, and is compatible with all GoFlight cockpit module enclosures. For mounting in custom cockpits, allow 5" of depth behind your panel for accommodation of the audio cables.

GF-LGT II Features: Elevator Trim Aileron Trim Rudder Trim Landing Gear Switch with Locking Feature, Up/Down and Center positions Flaps Up / Down Switch 3 dual-color LEDs showing state of Landing Gear Configurable 3-position toggle switch Software Compatibility: All Microsoft Flight Simulator 2004 (FS9) and FSX: default and add-on aircraft. All X-Plane (excluding Mobile version) and Project Magenta applicable software modules. The functions assigned to each configurable element are configured using GoFlight's GFConfig software (go to the current version by clicking here). Labeling of the switch is done by using the MagLabels included with each unit.